27 guides
Saw blades buying guides
4 min read
Burrs and rough ends: a saw blade check
A checklist for rough or burred cut ends on steel tube: check the blade, the machine and the material, then tell us what you see and we will confirm the line.
4 min read
Choosing saw blades by steel tensile strength
Start a Kinkelder blade choice from your steel: the low, medium and high tensile labels in our catalogue, the lines that list them, and what to tell us.
4 min read
How to read Kinkelder blade ratings
How to use the rating rows on our Kinkelder line pages, such as Low Tensile and Blade Life, to build a shortlist of blades before you ask us.
4 min read
HSS and TCT saw blades for buyers
How our catalogue describes the KINS' GREEN HSS line and the three TCT lines, and what to tell us so we can confirm the right one for your job.
4 min read
Kinkelder KINS' ORANGE flying cut-off blades compared
The six KINS' ORANGE flying cut-off blades with their catalogue ratings, and what to tell us so we can confirm the right version for your tube mill.
4 min read
Kinkelder saw blades in the UAE: how to order
How to order Kinkelder saw blades from us in Sharjah: the lines in our catalogue, how to start from your machine, and what to send us for a quote.
4 min read
KINS' red, blue, orange, green, yellow: which is which
A quick reference to our five Kinkelder colour lines (RED, BLUE, ORANGE, GREEN, YELLOW), the job each is listed for, and a link to every line page.
4 min read
Planning spare saw blades for a tube line
How to plan which saw blade versions to hold for a tube line, using the KINS' ORANGE and BLUE lines, and what to tell us about your lines and shifts.
4 min read
Saw blade life or cutting speed: which matters
How our catalogue scores blade life and cutting speed on the KINS' GREEN, ORANGE and RED lines, and what to tell us so we can confirm the right blade.
4 min read
Saw blade overheating and discoloured teeth
Blue or burnt teeth and heat marks on cut ends: checks on material, blade line and machine condition, and information to send us for quotation.
4 min read
Saw blade terms explained for buyers
TCT, HSS, segmental, flying cut-off, tensile, stationary and semi-automatic: what each word means on a Kinkelder quote, and where to read more.
4 min read
Saw blades for aluminium, copper and brass bar
What our Kinkelder catalogue says about cutting aluminium, copper and brass bar, which line carries a non-ferrous rating, and what to send us.
4 min read
Saw blades for cutting solid steel bars and billets
Compare TCT, HSS and segmental saw blades for solid steel bar in service centres and workshops, and learn what to send us to get the right blade first time.
4 min read
Saw blades for cutting steel tubes and pipes
Learn how to choose a saw blade for steel tube and pipe, from flying cut-off on a tube mill to stationary cut-to-length, and what to tell us before you order.
4 min read
Saw blades for low-power tube machines
What the Low power row on our KINS' BLUE blades shows, and what to tell us about your machine motor before you ask for a quote on a tube blade.
4 min read
Saw blades for semi-automatic tube machines
How to choose a Kinkelder blade for a stationary or semi-automatic tube cutter: what KINS' BLUE and KINS' GREEN list, and what to send us for a quote.
4 min read
Saw blades for stainless steel bars
The stainless versions in our KINS' RED and KINS' GREEN lines, how the catalogue rates them for solid bar, and what to tell us before you order a blade.
4 min read
Saw blades for stainless steel tubes
The stainless versions in our KINS' BLUE and KINS' ORANGE tube lines, how the catalogue rates them, and what to tell us before you order a blade.
4 min read
Saw blades for thin-wall steel tubes
How our catalogue rates thin tube in the KINS' ORANGE, BLUE and GREEN lines, how to read those rows, and what to tell us before you order a blade.
4 min read
Segmental saw blades: what our catalogue says
What our catalogue says about the KINS' YELLOW segmental blade, where it differs from the TCT lines, and what to tell us for large or heavy sections.
4 min read
Signs a saw blade needs replacing
How to read the teeth, the cut ends, the noise and the heat marks on a used saw blade, and what to send us from a Kinkelder blade when you order a new one.
4 min read
Thick-wall and multi-tube cutting: what our catalogue says
What our catalogue says about Kinkelder blades for thick-wall tube and multi-tube cuts, how the KINS' BLUE versions score, and what to send us.
4 min read
What to include in an industrial saw blade inquiry
What to tell us about your machine, your material and your current blade, so we can confirm the right Kinkelder saw blade for your job.
4 min read
Which Kinkelder blade for which metal
What our Kinkelder catalogue rates for steel, stainless and non-ferrous metal, why the lines are split by job, and what to tell us for a mixed workshop.
4 min read
Which saw blades a metal workshop needs
A shortlist by job for a workshop that cuts bar, tube and stainless on stationary saws, built from the lines in our Kinkelder catalogue, with what to send us.
4 min read
Why saw blade teeth chip or break
Teeth chipping or breaking on tube or bar: what to check on the blade, the material, the clamping and the machine, and what to send us for a quote.
4 min read
Why tube mill saw blades wear out early
Checks to run when flying cut-off blades on a tube mill lose life too fast: material, blade version, process and what to tell us, from KINS' ORANGE ratings.